|
15-6-torsion-snyatie-i-ustanovka.html
15.6. Torsion - removal and installation1. Lift a car front.
2. Unscrew nuts and get an adjusting bolt (photo).
|
|
4.2 Otvorachivaniye of a nut of a rod of the shock-absorber
|
|
|
4.3 Coupling bolt of the shock-absorber
|
|
|
4.6 Nut of the bottom fastening of the back shock-absorber
|
|
|
4.7 Nut of the top fastening of the back shock-absorber
|
|
|
5.2 A nut of an adjusting bolt торсиона (on all-wheel drive cars)
|
|
|
5.3 Cover and lock ring of the lever торсиона 1. Cover 2. Lock ring
|
|
|
5.4 Nuts of fastening of the lever торсиона to the bottom lever of a suspension bracket on rear-wheel cars
|
3. Remove a cover and get a lock ring (photo)
4. On rear-wheel cars displace the lever торсиона from a body towards a back part of the car and get торсион. Remove the lever торсиона from the bottom lever of a suspension bracket (photo).
5. On all-wheel drive cars unscrew bolts of fastening of the lever торсиона to the bottom lever (photo) and remove торсион together with the internal lever, having displaced it towards a forward part of the car.
6. Check a condition торсиона, existence on it krutilny deformations, damages, check integrity of the shlitsevy terminations.
7. On rear-wheel cars fix the lever торсиона on the bottom lever, tighten bolts with the set moment. Grease shlitsa and insert торсион into the lever from a suspension bracket.
|
|
5.5 Nuts of fastening of the lever торсиона to the bottom lever of a suspension bracket on all-wheel drive cars
|
|
|
5.9 Before installation торсиона the gap With should be equal to the Lake 1. Bottom lever 2. Buffer
|
|
|
5.10 Establish the motionless lever торсиона from a frame and adjust so that the gap of G corresponded to norm 1. On rear-wheel and/m 2. On all-wheel drive and/m
|
8. On all-wheel drive cars fix торсион on the bottom lever and tighten bolts with the set moment.
Внимание1.
If both acted in film торсиона, establish them on former places, being guided on R labels (right) and L (left).
9. Raise a jack the bottom lever against the stop lever buffers in a frame (photo).
10. Establish the motionless lever and adjust a starting position of the mobile lever торсиона so that the gap of G corresponded specified in Specifications (photo).
11. Establish a lock ring in a flute of the mobile lever and dress a cover.
12. Rotating a nut of the motionless lever, establish the size L of a vystupaniye of a bolt (photo).
|
|
5.12 Rotating a nut, establish the size L of a vystupaniye of a bolt of the motionless lever 1. On rear-wheel and/m 2. On all-wheel drive and/m
|
|
|
5.13а the Size H which should be exposed at adjustment торсиона on rear-wheel cars 1. Center of an axis of the bottom lever of a suspension bracket 2. Boat of fastening of an extension
|
|
|
5.13б the Size H which should be exposed on all-wheel drive cars 1. Bottom edge of the limiter of turn of wheels
|
|
|
6.2а Details of fastening of an extension on rear-wheel cars 1. Persistent washers 2. Frame 3. Extension 4. Plug 5. Fillet
|
13. Lower the car on wheels and press out a suspension bracket. Check amplitude of a kachaniye of the lever H in the specified points (photo). If the size H does not correspond specified in Specifications, rotating a bolt nut торсиона, establish the standard size.
14. Check and adjust corners of installation of wheels (it is carried out in car-care center).
|