Nissan Terrano 2 from 1985 to 1999
1. Maintenance instruction and to maintenance
2. Car maintenance
3. Четырехцилиндровыв engines
4. VS engines
5. All engines
6. Systems of cooling, heating, ventilation and conditioning
7. Fuel and exhaust systems
8. System of electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. Mechanical transmission
11. Automatic transmissions
12. Coupling driveshaft and back bridge
13. A running gear of cars with a wheel formula 4x4
14. Brake system
15. Suspension brackets and steering
16. Body and furnish elements
16.1. Specifications
16.2. Care of loops and locks
16.3. A windscreen and motionless glasses of a body - replacement
16.4. Bumpers - removal and installation
16.5. A forward lattice - removal and installation
16.6. A forward apron - removal and installation
16.7. An air inlet lattice - removal and installation
16.8. A forward wing - removal and installation
16.9. Cowl adjustment
16.10. A cowl - removal and installation
16.11. Cowl locks - removal and installation.
16.12. A cable of a drive of the lock of a cowl - removal and installation
16.13. A back cover - removal and installation
16.14. The lock of a back cover and a drive cable - removal and installation
16.15. The internal panel of a door - removal and installation
16.16. Door glass and a window regulator - removal and installation
16.17. The door lock and handles - removal and installation
16.18. A door - removal and installation
16.19. A window leaf of lateral glass - removal and installation
16.20. Seats - removal and installation
16.21. Seat belts - general information
16.22. The central section - removal and installation
17. Electric equipment system
 






16-16-dvernoe-steklo-i-steklopodemnik-snyatie-i-ustanovka.html

16.16. Door glass and a window regulator - removal and installation

1. Remove the internal panel of a door.
2. Turn on 90 ° latches with which external facing of a door fastens, raise and remove facing.
3. Remove the plastic water filter.
4. Remove a window regulator trench.

18.3 Window leaf and/m "Terrano I/Pathfinder"


19.1а Otvorachivaniye of seat bolts


19.1б Details of a forward separate seat 1. Head restraint. To remove a head restraint unscrew a facing overlay of a back of a seat 2. Regulator of an inclination of a back 3. Adjustment of the mechanism is not provided 4. Wire of a natyazhitel 5. Management wire регул


5. Unscrew bolts of fastening of glass to a window regulator.
6. Displace glass up and remove.
7. If necessary unscrew bolts and get a window regulator through an aperture in a framework of a door (photo).
8. Before assembly grease rubbing surfaces with a thin layer литола.
9. Installation is carried out upside-down. After installation adjust glass. For this purpose expose glass at first parallel to the top trench, and then level on a back trench and tighten bolts. Adjustment of smoothness of a course of glass is provided with turn of a forward trench at the released bolts.


«previous page
16.15. The internal panel of a door - removal and installation
following page»
16.17. The door lock and handles - removal and installation