Nissan Terrano 2 from 1985 to 1999
1. Maintenance instruction and to maintenance
2. Car maintenance
2.1. Introduction
2.2. Maintenance terms
2.3. An order of performance of adjustments - general comments
2.4. Check of level of liquids
2.5. Check of level of liquid in automatic transmission
2.6. Check of level of liquid of the power steering
2.7. Check of tires (through each 400 kilometers or weekly)
2.8. Care of the battery
2.9. Care of cooling system
2.10. Check of brushes of screen wipers
2.11. Check of a condition of the hoses located in a motor compartment.
2.12. Check and adjustment of a pedal of a brake
2.13. Replacement of oil and oil filter
2.14. Check and adjustment of gaps of valves
2.15. Greasing of a running gear and steering
2.16. Suspension bracket and steering check
2.17. Driveshaft check
2.18. Check of an exhaust system
2.19. Check and adjustment of a pedal of coupling
2.20. Check of level of oil in a manual transmission
2.21. Check of level of oil in a transfer case
2.22. Check of level of oil and картередифференциала (or in a reducer of the back bridge)
2.23. Shift of wheels
2.24. Check of brakes
2.25. Check of fuel system
2.26. Check of the thermostat of the air filter
2.27. Drive belts - check, adjustment and replacement
2.28. Check of seat belts
2.29. Replacement of the air filter and filter of ventilation of a case
2.30. Replacement of the fuel filter
2.31. Replacement of the filter of the ezhektsionny valve of system of a dookisleniye exhaust gases
2.32. Replacement of the filter of a tank with an absorber
2.33. Check of fastening of the case of a butterfly valve
2.34. Check and adjustment of turns of idling (engines with fuel injection)
2.35. Oil replacement in a transfer case
2.36. Oil replacement in a manual transmission
2.37. Oil replacement in a reducer back (or forward) the bridge
2.38. Replacement of transmission liquid! in automatic transmission
2.39. Greasing replacement in naves of forward wheels and check of bearings (only for rear-wheel cars)
2.40. Replacement of cooling liquid
2.41. Check and replacement of a zolotnik of ventilation of a case
2.42. Replacement of spark plugs
2.43. High-voltage wires - check and replacement
2.44. A cover of the distributor and a rotor begunok - check and replacement.
2.45. Check and installation of the moment of ignition.
2.46. Oxygen sensor
3. Четырехцилиндровыв engines
4. VS engines
5. All engines
6. Systems of cooling, heating, ventilation and conditioning
7. Fuel and exhaust systems
8. System of electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. Mechanical transmission
11. Automatic transmissions
12. Coupling driveshaft and back bridge
13. A running gear of cars with a wheel formula 4x4
14. Brake system
15. Suspension brackets and steering
16. Body and furnish elements
17. Electric equipment system
 






2-16-proverka-podveski-i-rulevogo-upravleniya.html

2.16. Suspension bracket and steering check

1. Check "these knots is recommended to be combined with any procedure at which the forward part of the car rises.
2. Signs of malfunction of a steering and a suspension bracket are raised люфт a wheel, a strong inclination of a body during the passing of turns, body vibrations when driving on the rough road, wheel jamming at turn.
3. Check operation of shock-absorbers for what several times sharply press each corner of the car and release, If after one-two pressing the body of the car does not come back to a starting position, it indicates an exit of shock-absorbers out of operation and need of their replacement. By pressing and an otpuskaniye of the car listen to sounds which publish suspension bracket details.
4. Lift a forward part the car and establish on supports.
5. Check a condition of all fastenings, and also leaks from the steering mechanism and shock-absorbers.
6. Clear and check integrity of sealants of spherical support and tips of steering drafts.
7. Check люфт bearings, having shaken a wheel in the vertical plane. At notable люфте adjust bearings.
8. Ask the assistant to shake a wheel in the horizontal plane, watching spherical support and tips of drafts. Attentively check люфты all the spherical hinges connecting a soshka to lateral drafts, the pendular lever and the central cross-section draft. The pendular lever fastens to bolts to a frame. Previously check an inhaling of all fastenings.
9. Check люфт in the steering mechanism for what holding a soshka turn a wheel (it is carried out with the assistant). Wheel moving at a motionless soshka indicates wear of the steering mechanism. If люфт it is observed only in the provision of wheels corresponding to driving on a straight line, the worm of a steering reducer If люфт it is observed in any situation is worn-out, up to a full reversing of wheels, the bearing of a shaft of a soshka is worn-out. To wear of a reducer also point oil leaks. In this case the reducer should be removed for check and repair.
10. Check люфт on a rim of a wheel which should not exceed 35 mm. Raised люфт points to wear of hinges and the steering mechanism.
11. Check a condition of details of a back suspension bracket (rubber plugs, fastenings, etc.).

«previous page
2.15. Greasing of a running gear and steering
following page»
2.17. Driveshaft check