Nissan Terrano 2 from 1985 to 1999
1. Maintenance instruction and to maintenance
2. Car maintenance
2.1. Introduction
2.2. Maintenance terms
2.3. An order of performance of adjustments - general comments
2.4. Check of level of liquids
2.5. Check of level of liquid in automatic transmission
2.6. Check of level of liquid of the power steering
2.7. Check of tires (through each 400 kilometers or weekly)
2.8. Care of the battery
2.9. Care of cooling system
2.10. Check of brushes of screen wipers
2.11. Check of a condition of the hoses located in a motor compartment.
2.12. Check and adjustment of a pedal of a brake
2.13. Replacement of oil and oil filter
2.14. Check and adjustment of gaps of valves
2.15. Greasing of a running gear and steering
2.16. Suspension bracket and steering check
2.17. Driveshaft check
2.18. Check of an exhaust system
2.19. Check and adjustment of a pedal of coupling
2.20. Check of level of oil in a manual transmission
2.21. Check of level of oil in a transfer case
2.22. Check of level of oil and картередифференциала (or in a reducer of the back bridge)
2.23. Shift of wheels
2.24. Check of brakes
2.25. Check of fuel system
2.26. Check of the thermostat of the air filter
2.27. Drive belts - check, adjustment and replacement
2.28. Check of seat belts
2.29. Replacement of the air filter and filter of ventilation of a case
2.30. Replacement of the fuel filter
2.31. Replacement of the filter of the ezhektsionny valve of system of a dookisleniye exhaust gases
2.32. Replacement of the filter of a tank with an absorber
2.33. Check of fastening of the case of a butterfly valve
2.34. Check and adjustment of turns of idling (engines with fuel injection)
2.35. Oil replacement in a transfer case
2.36. Oil replacement in a manual transmission
2.37. Oil replacement in a reducer back (or forward) the bridge
2.38. Replacement of transmission liquid! in automatic transmission
2.39. Greasing replacement in naves of forward wheels and check of bearings (only for rear-wheel cars)
2.40. Replacement of cooling liquid
2.41. Check and replacement of a zolotnik of ventilation of a case
2.42. Replacement of spark plugs
2.43. High-voltage wires - check and replacement
2.44. A cover of the distributor and a rotor begunok - check and replacement.
2.45. Check and installation of the moment of ignition.
2.46. Oxygen sensor
3. Четырехцилиндровыв engines
4. VS engines
5. All engines
6. Systems of cooling, heating, ventilation and conditioning
7. Fuel and exhaust systems
8. System of electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. Mechanical transmission
11. Automatic transmissions
12. Coupling driveshaft and back bridge
13. A running gear of cars with a wheel formula 4x4
14. Brake system
15. Suspension brackets and steering
16. Body and furnish elements
17. Electric equipment system
 






2-38-zamena-transmissionnojj-zhidkosti-v-avtomaticheskojj-transmissii.html

2.38. Replacement of transmission liquid! in automatic transmission

1. Make a short trip (15-20 mines) to warm up liquid to working temperature.
2. Prepare liquid of recommended brand.
3. Prepare the pallet of necessary capacity for liquid reception, rags and supports.
4. Lift the car and establish on supports.
5. Unscrew back and lateral bolts of the pallet of a case of transmission (working in gloves).
6. Unscrew forward bolts on 4 turns.
7. Carefully hook and displace the pallet, merge liquid in a vessel without loss.
8. Unscrew other bolts and remove the pallet, remove the consolidation remains.
9. Clear the pallet of the remains of a material of consolidation.
10. Put hermetic on new laying from the case plane.
11. Grease with hermetic other party of laying establish laying and evenly tighten bolts with behind this moment.
12. Lower the car. Fill in liquid in quantity equal to the merged.
13. Transfer the selector to situation P and turn on the hand brake. Start the engine and transfer to idling.
14. Transfer the selector to all provisions and check liquid level, if necessary add (see above)
15. Make a short trip and be convinced of lack of a leak.

«previous page
2.37. Oil replacement in a reducer back (or forward) the bridge
following page»
2.39. Greasing replacement in naves of forward wheels and check of bearings (only for rear-wheel cars)