Nissan Terrano 2 from 1985 to 1999
1. Maintenance instruction and to maintenance
2. Car maintenance
2.1. Introduction
2.2. Maintenance terms
2.3. An order of performance of adjustments - general comments
2.4. Check of level of liquids
2.5. Check of level of liquid in automatic transmission
2.6. Check of level of liquid of the power steering
2.7. Check of tires (through each 400 kilometers or weekly)
2.8. Care of the battery
2.9. Care of cooling system
2.10. Check of brushes of screen wipers
2.11. Check of a condition of the hoses located in a motor compartment.
2.12. Check and adjustment of a pedal of a brake
2.13. Replacement of oil and oil filter
2.14. Check and adjustment of gaps of valves
2.15. Greasing of a running gear and steering
2.16. Suspension bracket and steering check
2.17. Driveshaft check
2.18. Check of an exhaust system
2.19. Check and adjustment of a pedal of coupling
2.20. Check of level of oil in a manual transmission
2.21. Check of level of oil in a transfer case
2.22. Check of level of oil and (or in a reducer of the back bridge)
2.23. Shift of wheels
2.24. Check of brakes
2.25. Check of fuel system
2.26. Check of the thermostat of the air filter
2.27. Drive belts - check, adjustment and replacement
2.28. Check of seat belts
2.29. Replacement of the air filter and filter of ventilation of a case
2.30. Replacement of the fuel filter
2.31. Replacement of the filter of the ezhektsionny valve of system of a dookisleniye exhaust gases
2.32. Replacement of the filter of a tank with an absorber
2.33. Check of fastening of the case of a butterfly valve
2.34. Check and adjustment of turns of idling (engines with fuel injection)
2.35. Oil replacement in a transfer case
2.36. Oil replacement in a manual transmission
2.37. Oil replacement in a reducer back (or forward) the bridge
2.38. Replacement of transmission liquid! in automatic transmission
2.39. Greasing replacement in naves of forward wheels and check of bearings (only for rear-wheel cars)
2.40. Replacement of cooling liquid
2.41. Check and replacement of a zolotnik of ventilation of a case
2.42. Replacement of spark plugs
2.43. High-voltage wires - check and replacement
2.44. A cover of the distributor and a rotor begunok - check and replacement.
2.45. Check and installation of the moment of ignition.
2.46. Oxygen sensor
3. engines
4. VS engines
5. All engines
6. Systems of cooling, heating, ventilation and conditioning
7. Fuel and exhaust systems
8. System of electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. Mechanical transmission
11. Automatic transmissions
12. Coupling driveshaft and back bridge
13. A running gear of cars with a wheel formula 4x4
14. Brake system
15. Suspension brackets and steering
16. Body and furnish elements
17. Electric equipment system
 






2-7-proverka-shin-cherez-kazhdye-400-kilometrov-ili-ezhenedelno.html

2.7. Check of tires (through each 400 kilometers or weekly)

Care of tires is reduced to check of depth of a protector, pressure in tires (it is checked on cold tires), to identification of traces of abnormal wear and damages by which it is possible to determine a condition of details of a forward suspension bracket and a steering. (photo).

7.2 Protector check by a depth gage


Regularly delete the stones which have got stuck in a protector or sharp subjects. Periodically remove wheels and clear external and internal surfaces of a disk of dirt. If there are doubts concerning consequences of any found damages, address for consultation in a shinoremontny workshop. Rearrange wheels with the specified periodicity (see below).

Types and causes of wear of a protector of the tire


Types and causes of wear of a protector of the tire
1. Lateral wear of a protector
Reasons:
insufficient pressure in the tire (bilateral wear of a protector)
wrong disorder of forward wheels (unilateral wear of a protector).
passing of turns at great speed
long driving without shift of wheels
Way of elimination:
check pressure and restore to the normal
repair or replace suspension bracket details
go with moderate speed
rearrange wheels

2. Cross-section angular wear
Reasons:
Wrong convergence of wheels
Way of elimination:
Adjust a convergence

3. Wear of the central part of the tire
Reasons:
elevated pressure in tires long driving without shift of wheels
Way of elimination:
check pressure and restore to normal rearrange wheels

4. Non-uniform wear
Reasons:
violation of disorder of wheels or corner of a longitudinal inclination of an axis of turn
abnormal work of a forward suspension bracket
violation of balancing of a wheel
ovality of a brake drum
long driving without shift of wheels

Way of elimination:
Repair or replace suspension bracket details
Otbalansiruyte of a wheel
Pierce or replace a drum
Rearrange wheels

7.4 in case of pressure drop in the tire tighten a gate zolotnik


previous page
2.6. Check of level of liquid of the power steering
following page
2.8. Care of the battery