13-10-perednijj-reduktor-snyatie-i-ustanovka.html
13.10. A forward reducer - removal and installation1. Lift a front of the car and establish on supports.
2. Merge from a reducer oil.
|
10.2 Designate position of the driveshaft concerning a flange of a transfer case
|
|
10. 5 Carter and epiploons of a transfer case
1. Tube сапуна
2. Secret cap
3,8,10. Epiploon
4. Stopper of a refueling opening
5. Drain stopper
6.11. Case section
7. Forward cover
9. Sensor of the alarm system of inclusion of the forward bridge
|
|
11.5а Sockets of wires on a transfer case
|
3. Disconnect from a reducer the forward driveshaft.
4. Unscrew bolts of fastening of semi-axes to a reducer, displace semi-axes and fix a wire, without allowing sagging on CV JOINTS.
5. Prop up a reducer a support.
6. Unscrew bolts of fastening of a reducer (photo).
7. Unscrew bolts of support of the engine and will hang out the engine.
8. Unscrew bolts of fastening of a reducer to a frame (photo).
9. Carefully lower a support and get a reducer.
10. Installation is carried out upside-down.
|