Nissan Terrano 2 from 1985 to 1999
1. Maintenance instruction and to maintenance
2. Car maintenance
3. Четырехцилиндровыв engines
4. VS engines
5. All engines
6. Systems of cooling, heating, ventilation and conditioning
7. Fuel and exhaust systems
8. System of electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. Mechanical transmission
11. Automatic transmissions
12. Coupling driveshaft and back bridge
13. A running gear of cars with a wheel formula 4x4
13.1. Specifications
13.2. General information
13.3. The device of an automatic interlock of a nave - removal and installation
13.4. Semi-axes - removal and installation
13.5. A semi-axis - dismantling and assembly
13.6. A nave and a rotary fist - smyaty and installation
13.7. Nave epiploons – removal and installation, adjustment of bearings
13.8. The forward driveshaft - removal and installation
13.9. Epiploons of a forward reducer - replacement
13.10. A forward reducer - removal and installation
13.11. Epiploons of a transfer case - replacement
13.12. A transfer case - removal and installation
13.13. A transfer case - dismantling
14. Brake system
15. Suspension brackets and steering
16. Body and furnish elements
17. Electric equipment system
 






13-7-salniki-stupicy-snyatie-i-ustanovka-regulirovka-podshipnikov.html

13.7. Nave epiploons – removal and installation, adjustment of bearings

1. Remove a nave and a fist.
2. Unscrew the screw of a lock plate.
3. Unscrew a lock-nut, fix a nave (photo).
4. Take a plate and a special washer (photo).
5. Hook and get a maslootrazhatel, вытолкните the bearing plug.
6. Take a fist (photo).
6.б Removal of a fist from a nave
7. Get a bearing cuff
8. Vypressuyte ring of the internal bearing (photo)
9. Unscrew bolts and remove a nave from a brake disk (Hl. 10).
10. Vypressuyte the external bearing by means of a press, remove a maslootrazhatel.
11. Wash out all details.

6.3 Nave fixing at a nut otvorachivaniye


5.6б Bolts of the bottom support


6.4 Nave, semi-axis and  rotary fist 1. Disk of a brake 2. Epiploon And 3. Internal bearing 4. External bearing 5. Lock-nut 6. Lock plate 7. Povodkovy coupling 8,10 Lock ring 9. The device for manual blocking of a nave (and/m early you


6.8 Vypressovka of a ring of the internal bearing 1. Brass small beards


12. Grease a holder of the external bearing, put greasing in a nave (photo) and press in the bearing in a nave, resting against an external ring. Fill with greasing the central space of a nave. Establish an external epiploon.
13. Establish a disk.
14. Grease and press the internal bearing.
15. Tighten a nave nut with the set moment.
16. Check freedom of rotation of a nave.
17. Grease and establish an internal epiploon

Adjustment

Attention!
The special key is applied to an otvorachivaniye and an inhaling of a nut (by Hl. 8)

18. Tighten a nut with the set moment.
19. Release a nut and check люфт which should be equal to zero.

6.12 Put greasing in places specified by shading


20. Turn a wheel in both directions.
21. Define a preliminary tightness in bearings. For this purpose, having hooked for the top hairpin on a dynamometer, define effort And under which the wheel will start to rotate. Further tighten a nut on 15-30 ° and establish on a nut a lock plate. Turn a wheel in both directions. Hook for the bottom hairpin on a dynamometer define effort In under which the wheel will start to rotate. The tightness is equal to a difference V-and.
22. Repeat procedure and achieve a normal tightness in bearings.
23. Establish a lock ring in a nut flute.
24. Establish other details upside-down.


«previous page
13.6. A nave and a rotary fist - smyaty and installation
following page»
13.8. The forward driveshaft - removal and installation