|
15-15-zamok-rulevojj-kolonki-snyatie-i-ustanovka.html
15.15. The lock of a steering column - removal and installation1. Prepare srezny screws of fastening of the lock (get only in Nissan car-care center).
2. Remove a wheel.
3. Remove a casing of a steering column.
4. Accurately drill two srezny screws, having picked up a drill for diameter of a rod part of the screw.
|
|
15.1 For access to a reducer it is necessary to shine a rubber apron
|
|
|
15.2 A bolt of the bottom hinge (on the car сги a drousilitel)
|
|
|
15.3 Removal of a soshka from a shaft of a reducer 1. Case of a reducer 2. Soshka
|
|
|
15.5 Bolts of fastening of a steering reducer is in a channel of the left longeron of a frame
|
5. Unscrew two additional screws and remove the lock. Disconnect wires.
6. At installation combine openings and wrap screws. Check, having inserted a key, operation of the lock and tighten screws.
7. Tighten srezny screws to an oblamyvaniye of heads (photo).
8. Other assembly is carried out upside-down.
|