Nissan Terrano 2 from 1985 to 1999
1. Maintenance instruction and to maintenance
2. Car maintenance
3. Четырехцилиндровыв engines
4. VS engines
5. All engines
6. Systems of cooling, heating, ventilation and conditioning
7. Fuel and exhaust systems
8. System of electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. Mechanical transmission
11. Automatic transmissions
12. Coupling driveshaft and back bridge
13. A running gear of cars with a wheel formula 4x4
14. Brake system
14.1. Specifications
14.2. General information
14.3. Blocks disk (forward and back) brakes - replacement
14.4. A brake support - removal, dismantling and installation
14.5. A brake disk - check, removal and installation
14.6. Back drum-type brakes - replacement of blocks
14.7. The wheel cylinder of back drum-type brakes - removal, dismantling and installation
14.8. See hl. 1
14.9. Disks of back brakes - check, removal and installation
14.10. Blocks of the hand brake (on back disk brakes) - removal, installation and adjustment
14.11. The main cylinder of brakes - removal, dismantling and installation
14.12. A regulator of pressure of brakes - removal and installation
14.13. The hydraulic actuator highway - check and replacement
14.14. Pumping of brakes
14.15. The vacuum amplifier of brakes - general information and check
14.16. The vacuum amplifier of brakes - removal and installation
14.17. The hand brake - adjustment
14.18. The lever of the hand brake - removal and installation
14.19. Cables of the hand brake - removal and installation
14.20. The switch of a signal of braking - removal and installation
14.21. Anti-blocking system (ABS) - general information and access to codes.
15. Suspension brackets and steering
16. Body and furnish elements
17. Electric equipment system
 








14-1-tekhnicheskie-dannye.html

14.1. Specifications

Specifications
Disk brakes
Disk palpation
no more than 0,07 mm
Unevenness of a disk on thickness
no more than 0,02 mm
Limiting thickness of a disk
CL25VA (zadneprmvodny and/m with 4-tsilindro-vymi engines)
20,0 mm
CL25VD (all all-wheel drive and/m and all and/m with V6 engines)
24,0 mm
AD14VB (disk of back brakes)
16,0 mm

Drum-type brakes
Internal diameter of a drum
LT26B (rear-wheel and/m)
261,5 mm
DS25B, DS25C, DS25D (all-wheel drive and/m)
255,5 mm
LT30A (since 1991)
296,5 mm
Radial palpation
no more than 0,05 mm
Ovality
no more than 0,03 mm
Konusnost
no more than 0,04 mm

Vacuum amplifier
Vystupaniye of a pusher from the main cylinder
10,275-10,525 mm
Pusher adjustment from a pedal
it is not provided

Inhaling moments (N of m)
Fingers of a support of forward disk brakes
20-27
Bolts of fastening of a support to a rotary fist
64-86
Fingers of a support of back disk brakes (1988)
20-27
Bolts of fastening of a support to a beam of the back bridge (1988г.)
48-58
Bolts of fastening of a nave to a disk
43-63
Bolt of fastening of the union of a hose to a support
15-17
Nut of an axis of a pedal
Till 1990.
7,2-9,7
Since 1991.
15-20
Bolts of fastening of the amplifier of brakes to a partition of a motor compartment
Till 1990.
7,2-9,7
Since 1991.
12-15
Nuts of fastening of the main cylinder
7,2-9,7
Bolts of fastening of a board of a brake to a beam of the back bridge
47-56
Nuts of fastening of wheel cylinders
Till 1990.
4,7-6,7
Since 1991.
5,9-9,7
Bolts of fastening of a regulator of pressure of back brakes
Till 1990.
7,2-9,7
Since 1991.
15-18


«previous page
14. Brake system
following page»
14.2. General information