15.16. A steering reducer - removal and installation
1. Remove the left forward wheel. For access to a reducer get a rubber apron from a motor compartment (photo).
2. Unscrew a bolt of fastening of the hinge to a reducer (photo).
3. Unscrew a nut of a soshka and take a soshka (photo).
4. On cars with the power steering turn on and muffle the union of tubes and merge liquid from a hydraulic actuator.
5. Unscrew bolts and take a reducer (photo).
16.2 Details of a steering reducer
3. Adjusting nut
4. Ball nut and leading shaft of a reducer
5. Spring washer
8. Soshka shaft
9. Adjusting screw
16.5 Otvorachivaniye of an adjusting nut of a reducer
6. Installation is carried out and a return order. Before a wraparound of a bolt of the bottom hinge expose wheels in the provision of driving on a straight line, check the provision of a steering wheel. The flute on a shaft should be combined with an opening under a bolt in the elastic coupling. Tighten all bolts with the set moment. At installation of a soshka check coincidence шлицов a soshka and in bulk. Tighten a nut with the set moment. On cars with the hydraulic booster fill in liquid and remove air.