Nissan Terrano 2 from 1985 to 1999
1. Maintenance instruction and to maintenance
2. Car maintenance
3. Четырехцилиндровыв engines
4. VS engines
5. All engines
6. Systems of cooling, heating, ventilation and conditioning
7. Fuel and exhaust systems
8. System of electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. Mechanical transmission
11. Automatic transmissions
12. Coupling driveshaft and back bridge
13. A running gear of cars with a wheel formula 4x4
14. Brake system
15. Suspension brackets and steering
15.1. Specifications
15.2. General information
15.3. Hairpins of fastening of a wheel - replacement
15.4. The stabilizer - removal and installation
15.5. Shock-absorbers - removal and installation
15.6. Torsion - removal and installation
15.7. Bars and suspension bracket extensions - removal and installation
15.8. The top lever and a spherical support - removal and installation
15.9. The bottom lever and a spherical support - removal and installation
15.10. Springs of a back suspension bracket - removal and installation
15.11. Bars of a back suspension bracket - removal and
15.12. The stabilizer of a back suspension bracket - removal and installation
15.13. A steering - general information
15.14. A wheel - removal and installation
15.15. The lock of a steering column - removal and installation
15.16. A steering reducer - removal and installation
15.17. A steering reducer (and/m without the hydraulic booster) - dismantling
15.18. Steering
15.19. The pump hydraulic boosters - removal and installation
15.20. Air removal from a wheel hydraulic actuator
15.21. Steering drafts - removal and installation
15.22. Corners of installation of forward wheels - general information
15.23. Wheels and tires - general information
16. Body and furnish elements
17. Electric equipment system
 







ремонт дома щёлково | Курение порно

15-7-shtangi-i-rastyazhki-podveski-snyatie-i-ustanovka.html

15.7. Bars and suspension bracket extensions - removal and installation

1. Lift a car front. Remove a mud guard (if it is provided).
2. Unscrew a bar nut (or extensions) and take a washer and plugs (photo).
3. Unscrew nuts of bolts of fastening of a bar to the bottom lever (photo),
4. Will remove a bar
5. If act in film both bar, designate them to establish on former places.

6.2б bar Fastening on on all-wheel drive cars
6.2б bar Fastening on on all-wheel drive cars


6.3 Two bolts of fastening of a bar to the bottom lever
6.3 Two bolts of fastening of a bar to the bottom lever


6.6 The correct installation of details of fastening of a bar at assembly. Washers should be turned by a concave part outside. 1. Plugs 2. Washers
6.6 The correct installation of details of fastening of a bar at assembly. Washers should be turned by a concave part outside. 1. Plugs 2. Washers


6. Installation is carried out upside-down, track correctness of installation of details (photo). Bolts and nuts finally tighten after car lowering on wheels.


«previous page
15.6. Torsion - removal and installation
following page»
15.8. The top lever and a spherical support - removal and installation