Nissan Terrano 2 from 1985 to 1999
1. Maintenance instruction and to maintenance
2. Car maintenance
3. Четырехцилиндровыв engines
4. VS engines
5. All engines
6. Systems of cooling, heating, ventilation and conditioning
7. Fuel and exhaust systems
8. System of electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. Mechanical transmission
11. Automatic transmissions
12. Coupling driveshaft and back bridge
13. A running gear of cars with a wheel formula 4x4
14. Brake system
15. Suspension brackets and steering
15.1. Specifications
15.2. General information
15.3. Hairpins of fastening of a wheel - replacement
15.4. The stabilizer - removal and installation
15.5. Shock-absorbers - removal and installation
15.6. Torsion - removal and installation
15.7. Bars and suspension bracket extensions - removal and installation
15.8. The top lever and a spherical support - removal and installation
15.9. The bottom lever and a spherical support - removal and installation
15.10. Springs of a back suspension bracket - removal and installation
15.11. Bars of a back suspension bracket - removal and
15.12. The stabilizer of a back suspension bracket - removal and installation
15.13. A steering - general information
15.14. A wheel - removal and installation
15.15. The lock of a steering column - removal and installation
15.16. A steering reducer - removal and installation
15.17. A steering reducer (and/m without the hydraulic booster) - dismantling
15.18. Steering
15.19. The pump hydraulic boosters - removal and installation
15.20. Air removal from a wheel hydraulic actuator
15.21. Steering drafts - removal and installation
15.22. Corners of installation of forward wheels - general information
15.23. Wheels and tires - general information
16. Body and furnish elements
17. Electric equipment system
 








15-5-amortizatory-snyatie-i-ustanovka.html

15.5. Shock-absorbers - removal and installation

Forward shock-absorbers
1. Turn out wheels, lift a car front. 2. Unscrew a rod nut, take a washer and the plug (photo).
3. Unscrew a nut and get a coupling bolt (photo).
4. Installation is carried out upside-down. The head of the bottom bolt should be turned forward on a car course.

1.3 Details of a back suspension bracket of the Pathfinder 1 car. Basic cup of a spring 2. Bar 3. Shock-absorber 4. Cross-section bar 5. Spring 6. Longitudinal bar 7. Stabilizer 8. Draft of the stabilizer 9. To a forward part of the car


3.3 Before unscrewing a nut of draft designate ztilka, washers and gshokladka
3.3 Before unscrewing a nut of draft designate ztilka, washers and gshokladka


3.5 Bolts of an arm of the stabilizer.
3.5 Bolts of an arm of the stabilizer.


Back shock-absorbers
5. Lift a back part of the car for a beam of the bridge and establish on a reliable support.
6. Unscrew a nut of the bottom fastening of the shock-absorber to an arm of the bridge (photo).
7. Unscrew a nut of the top fastening of the shock-absorber and take the shock-absorber (photo)
8. Establish shock-absorbers in a former order, nuts finally tighten after car lowering on wheels.


«previous page
15.4. The stabilizer - removal and installation
following page»
15.6. Torsion - removal and installation