|
2-44-kryshka-raspredelitelya-i-begunok-rotora-proverka-i-zamena.html
2.44. A cover of the distributor and a rotor begunok - check and replacement.
|
Attention!
The cover of the distributor is recommended to be changed together with candles.
|
|
|
44.1 Screws of a cover of the distributor
|
1. Disconnect a wire of the coil of ignition, unscrew screws (or disconnect latches) and uncover (photo). Carefully take a cover aside.
2. Check a condition a begunka (photo). At detection of any defects a begunok replace, for what remove it from a rotor (or unscrew a bolt) and establish new (photo).
|
|
44.2 Characteristic damages distributor begunka
1. Loss of elasticity of spring contact
2. Cracks
3. Damage because of a zadevaniye for a cover.
4. Corrosion
|
|
|
44.3 On engines of late releases the begunok fastens a bolt
|
|
|
44.4 Characteristic damages of a cover of the distributor
1. Skop of a nest under a wire
2. Erosion of conclusions
3. Wear of a piece of coal
4,5. Breakdown trace
6. Cracks
5. Establish a cover on and tighten screws.
|
3. Check a condition of wires of the switchboard built in the distributor.
4. Examine a cover, check existence from the interior of cracks, breakdown traces (thin burned out, paths), and also wear, podgoraniye and weakening of contacts (photo).При detection of the slightest signs of a doubtful condition a cover replace.
|