Nissan Terrano 2 from 1985 to 1999
1. Maintenance instruction and to maintenance
2. Car maintenance
2.1. Introduction
2.2. Maintenance terms
2.3. An order of performance of adjustments - general comments
2.4. Check of level of liquids
2.5. Check of level of liquid in automatic transmission
2.6. Check of level of liquid of the power steering
2.7. Check of tires (through each 400 kilometers or weekly)
2.8. Care of the battery
2.9. Care of cooling system
2.10. Check of brushes of screen wipers
2.11. Check of a condition of the hoses located in a motor compartment.
2.12. Check and adjustment of a pedal of a brake
2.13. Replacement of oil and oil filter
2.14. Check and adjustment of gaps of valves
2.15. Greasing of a running gear and steering
2.16. Suspension bracket and steering check
2.17. Driveshaft check
2.18. Check of an exhaust system
2.19. Check and adjustment of a pedal of coupling
2.20. Check of level of oil in a manual transmission
2.21. Check of level of oil in a transfer case
2.22. Check of level of oil and картередифференциала (or in a reducer of the back bridge)
2.23. Shift of wheels
2.24. Check of brakes
2.25. Check of fuel system
2.26. Check of the thermostat of the air filter
2.27. Drive belts - check, adjustment and replacement
2.28. Check of seat belts
2.29. Replacement of the air filter and filter of ventilation of a case
2.30. Replacement of the fuel filter
2.31. Replacement of the filter of the ezhektsionny valve of system of a dookisleniye exhaust gases
2.32. Replacement of the filter of a tank with an absorber
2.33. Check of fastening of the case of a butterfly valve
2.34. Check and adjustment of turns of idling (engines with fuel injection)
2.35. Oil replacement in a transfer case
2.36. Oil replacement in a manual transmission
2.37. Oil replacement in a reducer back (or forward) the bridge
2.38. Replacement of transmission liquid! in automatic transmission
2.39. Greasing replacement in naves of forward wheels and check of bearings (only for rear-wheel cars)
2.40. Replacement of cooling liquid
2.41. Check and replacement of a zolotnik of ventilation of a case
2.42. Replacement of spark plugs
2.43. High-voltage wires - check and replacement
2.44. A cover of the distributor and a rotor begunok - check and replacement.
2.45. Check and installation of the moment of ignition.
2.46. Oxygen sensor
3. Четырехцилиндровыв engines
4. VS engines
5. All engines
6. Systems of cooling, heating, ventilation and conditioning
7. Fuel and exhaust systems
8. System of electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. Mechanical transmission
11. Automatic transmissions
12. Coupling driveshaft and back bridge
13. A running gear of cars with a wheel formula 4x4
14. Brake system
15. Suspension brackets and steering
16. Body and furnish elements
17. Electric equipment system
 








2-28-proverka-remnejj-bezopasnosti.html

2.28. Check of seat belts

1. Check a condition of belts, buckles and fastenings.
2. Be convinced that at the included ignition the lamp reminding of need burns fastened belts.
3. Check operation inertial the mechanism of fixing of belts.
4. At detection of signs abnormal works assembled it is necessary to replace a belt.

27.5а Adjustment of a tension of belts 4-cylinder двигателей1. Pulley вентилятора2. Pulley компрессора3. Контргайка4. Регулировка5. Болт6,10. Ослабить7. Roles
27.5а Adjustment of a tension of belts of 4-cylinder engines
1. Fan pulley                 
2. Compressor pulley                
3. Lock-nut                             
4. Adjustment                           
5. Bolt
6,10. To weaken
7. Roles


27.4 Tension check ремня1. Брусок2. Линейка3. Deflection ремня4. The ruler should settle down perpendicularly to whetstone
27.4 Check of a tension of a belt
1. Whetstone
2. Ruler
3. Belt deflection
4. The ruler should settle down perpendicularly to whetstone


27.5б Adjustment of a tension of belts on the V61 engine. Pulley компрессора2. Pulley генератора3. Pulley коленвапа4. Pulley гидроусилителя5. Pulley of the pump of cooling
27.5б Adjustment of a tension of belts on the V6 engine
1. Compressor pulley
2. Generator pulley
3. Pulley коленвапа
4. Pulley of the hydraulic booster
5. Pulley of the pump of cooling


27.6а For adjustment of a tension of a belt of some units it is necessary to release the specified bolt...
27.6а For adjustment of a tension of a belt of some units it is necessary to release the specified bolt...


29.2 Removal of a cover of the filter
29.2 Removal of a cover of the filter


29.4 Removal of the filter of ventilation of a case
29.4 Removal of the filter of ventilation of a case


27.6б... a bolt And and to rotate a bolt In (on V6 engines)
27.6б... a bolt And and to rotate a bolt In (on V6 engines)


30.6 The fuel filter on carburetor engines with the electric pump
30.6 The fuel filter on carburetor engines with the electric pump




«previous page
2.27. Drive belts - check, adjustment and replacement
following page»
2.29. Replacement of the air filter and filter of ventilation of a case