Nissan Terrano 2 from 1985 to 1999
1. Maintenance instruction and to maintenance
2. Car maintenance
2.1. Introduction
2.2. Maintenance terms
2.3. An order of performance of adjustments - general comments
2.4. Check of level of liquids
2.5. Check of level of liquid in automatic transmission
2.6. Check of level of liquid of the power steering
2.7. Check of tires (through each 400 kilometers or weekly)
2.8. Care of the battery
2.9. Care of cooling system
2.10. Check of brushes of screen wipers
2.11. Check of a condition of the hoses located in a motor compartment.
2.12. Check and adjustment of a pedal of a brake
2.13. Replacement of oil and oil filter
2.14. Check and adjustment of gaps of valves
2.15. Greasing of a running gear and steering
2.16. Suspension bracket and steering check
2.17. Driveshaft check
2.18. Check of an exhaust system
2.19. Check and adjustment of a pedal of coupling
2.20. Check of level of oil in a manual transmission
2.21. Check of level of oil in a transfer case
2.22. Check of level of oil and картередифференциала (or in a reducer of the back bridge)
2.23. Shift of wheels
2.24. Check of brakes
2.25. Check of fuel system
2.26. Check of the thermostat of the air filter
2.27. Drive belts - check, adjustment and replacement
2.28. Check of seat belts
2.29. Replacement of the air filter and filter of ventilation of a case
2.30. Replacement of the fuel filter
2.31. Replacement of the filter of the ezhektsionny valve of system of a dookisleniye exhaust gases
2.32. Replacement of the filter of a tank with an absorber
2.33. Check of fastening of the case of a butterfly valve
2.34. Check and adjustment of turns of idling (engines with fuel injection)
2.35. Oil replacement in a transfer case
2.36. Oil replacement in a manual transmission
2.37. Oil replacement in a reducer back (or forward) the bridge
2.38. Replacement of transmission liquid! in automatic transmission
2.39. Greasing replacement in naves of forward wheels and check of bearings (only for rear-wheel cars)
2.40. Replacement of cooling liquid
2.41. Check and replacement of a zolotnik of ventilation of a case
2.42. Replacement of spark plugs
2.43. High-voltage wires - check and replacement
2.44. A cover of the distributor and a rotor begunok - check and replacement.
2.45. Check and installation of the moment of ignition.
2.46. Oxygen sensor
3. Четырехцилиндровыв engines
4. VS engines
5. All engines
6. Systems of cooling, heating, ventilation and conditioning
7. Fuel and exhaust systems
8. System of electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. Mechanical transmission
11. Automatic transmissions
12. Coupling driveshaft and back bridge
13. A running gear of cars with a wheel formula 4x4
14. Brake system
15. Suspension brackets and steering
16. Body and furnish elements
17. Electric equipment system
 








2-5-proverka-urovnya-zhidkosti-v-avtomaticheskojj-transmissii.html

2.5. Check of level of liquid in automatic transmission

1. Liquid level in automatic transmission should correspond to norm, normal work of transmission otherwise is broken and breakages are possible.
2. Transfer the engine to an idling mode, the lever of the selector put in the situation "Park".

Attention!
After a trip under trying conditions, level is checked later not less than 30 mines after a car stop. The engine should idle.

3. On heated-up transmission get щуп from a measuring instrument branch pipe. Shchup is in a back part of a motor compartment from the passenger (photo).
4. Check to the touch temperature and wipe щуп dry. Insert щуп into place against the stop into a branch pipe.
5. Get щуп and define level.
6. At liquid 30-50 temperature ° About level should be between "cold" marks, and at temperature 50-80 ° With - between marks of "hot" (photo).

5.3 Shchup on automatic transmission
5.3 Shchup on automatic transmission


4.19б liquid Level should be in a tank of coupling between marks of min and the shah
4.19б liquid Level should be in a tank of coupling between marks of min and the shah


If necessary add liquid through a measuring instrument branch pipe, having inserted a funnel with a thin metal grid. To add liquid follows in the portions, until then while level will not be established between the top and bottom labels щупа for the corresponding temperature range. If liquid of dark color, or exudes a burned smell, it is necessary to replace it.
5.6а Marks on щупе transmissions of cars With a wheel formula 4x2...
5.6а Marks on щупе transmissions of cars With a wheel formula 4x2...


5.6б... and cars With a wheel formula 4x4
5.6б... and cars With a wheel formula 4x4


6.5 A tank stopper with shchupy (V6 engine)
6.5 A tank stopper with shchupy (V6 engine)




«previous page
2.4. Check of level of liquids
following page»
2.6. Check of level of liquid of the power steering