Nissan Terrano 2 from 1985 to 1999
1. Maintenance instruction and to maintenance
2. Car maintenance
3. Четырехцилиндровыв engines
3.1. General information
3.2. Types of the repair work which is carried out without dismantle of the engine from the car
3.3. An order of installation of the piston of the 1st cylinder in VMT of a step of compression.
3.4. A cover of a head of cylinders - removal and installation
3.5. The roller with yokes - removal and installation
3.6. The roller with yokes - dismantling and assembly
3.7. A cam-shaft - removal and installation
3.8. A cam-shaft, support and yokes - check
3.9. Springs of valves and maslosjemny caps - replacement
3.10. A soaking-up collector - removal and installation
3.11. A final collector - removal and installation
3.12. A head of cylinders - removal
3.13. A head of cylinders - installation
3.14. The oil pump - removal and installation
3.15. The oil pump - check
3.16. A crankshaft pulley - removal and installation
3.17. A forward epiploon of the crankshaft - replacement
3.18. A forward cover - removal and installation
3.19. A chain and asterisks - removal and installation
3.20. The oil pallet - removal and installation
3.21. A flywheel (a leading disk of the hydrotransformer) - removal and installation
3.22. A back epiploon - replacement
3.23. Engine support - replacement
4. VS engines
5. All engines
6. Systems of cooling, heating, ventilation and conditioning
7. Fuel and exhaust systems
8. System of electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. Mechanical transmission
11. Automatic transmissions
12. Coupling driveshaft and back bridge
13. A running gear of cars with a wheel formula 4x4
14. Brake system
15. Suspension brackets and steering
16. Body and furnish elements
17. Electric equipment system
 








3-17-perednijj-salnik-kolenvala-zamena.html

3.17. A forward epiploon of the crankshaft - replacement

17. A forward epiploon of the crankshaft - replacement
1. Remove a pulley.
2. Carefully get an epiploon, having hooked it a screw-driver or other tool (photo).
3. Clear an opening under an epiploon and slightly oil an external surface of a new epiploon for the engine. Carefully press a new epiploon into place by means of an opravka with a diameter a little smaller than diameter of an epiploon (photo). After installation be convinced that the provision of a spring of an epiploon is not broken.
4. Establish a pulley.
5. Establish other details. Start the engine and be convinced of lack of a leak.

17.2 Forward epiploon of the crankshaft
17.2 Forward epiploon of the crankshaft


17.3 Epiploon press fitting
17.3 Epiploon press fitting


18.14а At removal of a cover do not damage a forward part of laying of a head of cylinders
18.14а At removal of a cover do not damage a forward part of laying of a head of cylinders


18.14б Forward cover of the K241 engine. Коленвал2. Asterisk коленвала3. Маслоотражатель4. Шкив5. Сальник6. Крышка7. Boot of a natyazhitel and uspokoitel цепи8. Натяжитель9. Звездочка10. Chain
18.14б Forward cover of the K24 engine
1. Crankshaft
2. Crankshaft asterisk
3. Maslootrazhatel
4. Pulley
5. Epiploon
6. Cover
7. Boot of a natyazhitel and uspokoitel of a chain
8. Natyazhitel
9. Asterisk
10. Chain



«previous page
3.16. A crankshaft pulley - removal and installation
following page»
3.18. A forward cover - removal and installation