Nissan Terrano 2 from 1985 to 1999
1. Maintenance instruction and to maintenance
2. Car maintenance
3. Четырехцилиндровыв engines
4. VS engines
4.1. General information
4.2. Types of the repair work which is carried out without dismantle of the engine from the car
4.3. An order of installation of the piston of the 1st cylinder in VMT of a step of compression.
4.4. Covers of heads of cylinders – removed and installation
4.5. The roller with yokes - removal and installation
4.6. Hydropushers - removal and installation
4.7. A soaking-up collector - removal and installation
4.8. A final collector - removal and installation
4.9. A pulley - an uspokoitel - removal and
4.10. A gear belt - removal and installation
4.11. A forward epiploon of the crankshaft - replacement
4.12. A cam-shaft epiploon - replacement
4.13. Heads of cylinders - removal and installation
4.14. A cam-shaft - removal and installation
4.15. Details of the klapanny mechanism - check
4.16. The oil pallet - removal and installation
4.17. The oil pump - removal, check and installation
4.18. A back epiploon - replacement
4.19. A flywheel (a leading disk of the hydrotransformer) -
4.20. Engine support - replacement
5. All engines
6. Systems of cooling, heating, ventilation and conditioning
7. Fuel and exhaust systems
8. System of electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. Mechanical transmission
11. Automatic transmissions
12. Coupling driveshaft and back bridge
13. A running gear of cars with a wheel formula 4x4
14. Brake system
15. Suspension brackets and steering
16. Body and furnish elements
17. Electric equipment system
 







Смотрите http://materinskiy-kapital.krasnodar.su взять займ под материнский капитал. | бухгалтерские услуги в москве, стоимость | Такси из Москвы в Санкт Петербург смотрите на сайте.

4-14-raspredval-snyatie-i-ustanovka.html

4.14. A cam-shaft - removal and installation

Removal
1. Remove a head of cylinders.

14.4а Holding a cam-shaft for deepening...
14.4а Holding a cam-shaft for deepening...


14.5а Extraction of an epiploon of a cam-shaft
14.5а Extraction of an epiploon of a cam-shaft


14.5б cam-shaft Removal
14.5б cam-shaft Removal


14.6 Check axial люфта распредвала1. Индикатор2. Люфт3. Болт4. Распредвал5. Persistent washer
14.6 Check axial люфта cam-shaft
1. Indicator
2. Люфт
3. Bolt
4. Cam-shaft
5. Persistent washer


14.7 A persistent washer for adjustment axial люфта a cam-shaft. It is delivered in the spare part the every thickness (in brackets the size in mm).1. Label С2. Without метки3. Кернение4. To a lateral part of the engine
14.7 A persistent washer for adjustment axial люфта a cam-shaft. It is delivered in the spare part the every thickness (in brackets the size in mm).
1. A label With
2. Without a label
3. Kerneniye
4. To a lateral part of the engine


15.1 Surface of a support of a cam-shaft
15.1 Surface of a support of a cam-shaft


15.2 Measurement of a basic neck
15.2 Measurement of a basic neck


15.3 Check of palpation of a cam-shaft
15.3 Check of palpation of a cam-shaft


15.4 Check of wear of cams of a cam-shaft
15.4 Check of wear of cams of a cam-shaft


2. Remove pushers together with the case and rollers with yokes.
3. Take a face cover (photo).
4. Holding a cam-shaft, unscrew the central bolt (photo). Get a bolt and a washer.
5. Carefully get an epiploon and a cam-shaft (photo).
Installation
6. Grease basic necks and establish a cam-shaft. Tighten a bolt and check axial люфт (photo). Люфт should be 0,03-0,06 mm.
7. If люфт exceeds norm, a persistent washer replace (photo).

15.5 Checked surfaces of a hydropusher
15.5 Checked surfaces of a hydropusher


15.6а Check diameter of a pusher...
15.6а Check diameter of a pusher...



«previous page
4.13. Heads of cylinders - removal and installation
following page»
4.15. Details of the klapanny mechanism - check