Nissan Terrano 2 from 1985 to 1999
1. Maintenance instruction and to maintenance
2. Car maintenance
3. Четырехцилиндровыв engines
4. VS engines
4.1. General information
4.2. Types of the repair work which is carried out without dismantle of the engine from the car
4.3. An order of installation of the piston of the 1st cylinder in VMT of a step of compression.
4.4. Covers of heads of cylinders – removed and installation
4.5. The roller with yokes - removal and installation
4.6. Hydropushers - removal and installation
4.7. A soaking-up collector - removal and installation
4.8. A final collector - removal and installation
4.9. A pulley - an uspokoitel - removal and
4.10. A gear belt - removal and installation
4.11. A forward epiploon of the crankshaft - replacement
4.12. A cam-shaft epiploon - replacement
4.13. Heads of cylinders - removal and installation
4.14. A cam-shaft - removal and installation
4.15. Details of the klapanny mechanism - check
4.16. The oil pallet - removal and installation
4.17. The oil pump - removal, check and installation
4.18. A back epiploon - replacement
4.19. A flywheel (a leading disk of the hydrotransformer) -
4.20. Engine support - replacement
5. All engines
6. Systems of cooling, heating, ventilation and conditioning
7. Fuel and exhaust systems
8. System of electric equipment of the engine
9. System of decrease in toxicity of exhaust gases
10. Mechanical transmission
11. Automatic transmissions
12. Coupling driveshaft and back bridge
13. A running gear of cars with a wheel formula 4x4
14. Brake system
15. Suspension brackets and steering
16. Body and furnish elements
17. Electric equipment system
 








4-17-maslyanyjj-nasos-snyatie-proverka-i-ustanovka.html

4.17. The oil pump - removal, check and installation

Removal
1. Remove a gear belt, a pulley and the pallet.
2. Unscrew bolts and remove a maslopriyemnik.
3. Unscrew bolts of the oil pump and remove the pump, having displaced blows through a wooden pig (photo).
4. Clear the pump.
Check
5. Uncover and wash out all details in solvent. Unscrew a cap and get the reduktsionny valve (photo).

16.18 Order of a tightening of bolts поддона1. To a forward part of the engine
16.18 Order of a tightening of bolts of the pallet
1. To a forward part of the engine


17.3б Removal of the oil pump
17.3б Removal of the oil pump


17.5 Details oil насоса1. Internal шестерня2. External gear wheel
17.5 Details of the oil pump
1. Internal gear wheel
2. External gear wheel


6. Check gaps of the pump (photo). If one of gaps differs from norm, replace pair of gear wheels or the pump.
7. Fill a cavity наоса with technical vaseline and collect the pump.
Installation
8. Grease with hermetic the demountable plane of the pump.
9. Establish all details upside-down, having replaced all laying and a sealant (photo).

17.6а gap Check between an external gear wheel and the case of the pump (And), between an internal gear wheel and a crescent insert (In) and between an external gear wheel and a crescent insert (C)
17.6а gap Check between an external gear wheel and the case of the pump (And), between an internal gear wheel and a crescent insert (In) and between an external gear wheel and a crescent insert (C)


17.6б Check of a face gap
17.6б Check of a face gap


17.9 Replacement of a sealing ring of a maslopriyemnik
17.9 Replacement of a sealing ring of a maslopriyemnik



«previous page
4.16. The oil pallet - removal and installation
following page»
4.18. A back epiploon - replacement